Use Openvpn To Access Your Home Network - TP-Link Archer MR600 User Manual

Chapter 11 Specify Your Network Settings
c . If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection
is working properly now.
Done!
Now IPSec VPN is implemented to establish a connection.
Note:
1. The product supports a maximum of ten simultaneous connections.
2. If one of the site has been off line for a while, for example, if Site A has been disconnected, on Site B you need to click
Disable and then click Enable after Site A back on line in order to re-establish the IPSec tunnel.
11 8 2

Use OpenVPN to Access Your Home Network

In the OpenVPN connection, the home network can act as a server, and the remote
device can access the server through the router which acts as an OpenVPN Server
gateway. To use the VPN feature, you should enable OpenVPN Server on your router,
and install and run VPN client software on the remote device. Please follow the steps
below to set up an OpenVPN connection.
Home Network Router Remote Device
Step1. Set up OpenVPN Server on Your Router
1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server.
64