Alarms, Errors, And Events - Juniper PTX10008 Hardware Manual

Alarms, Errors, and Events

Chassis and Line Card Alarms
NOTE: For ot and et alarms, see
Chassis and line card:
Line card (FRU) inserted or removed
Line card (FRU) Administrative State: In Service, Out Of Service
Line card (FRU) Operational State: Unequipped, Init, Normal, Mismatch, Fault, Upgrade
Mismatch equipment
Temperature alarm
ET Interface Alarms
Interface Administrative State: In Service, Out Of Service, Service MA, Out of Service MA
Interface Operational State: Init, Normal, Fault, Degraded
ET Interface Optical Channel Transport Unit (OTU) TCAs:
OTU-TCA-BBE—15-minute background block error TCA
OTU-TCA-ES—15-minute errored seconds TCA
OTU-TCA-SES—15-minute severely errored seconds TCA
OTU-TCA-UAS—15-minute unavailable seconds TCA
ET Interface Optical Channel Data Unit (ODU) TCAs
ODU-TCA-BBE—15-minute background block error TCA
ODU-TCA-ES—15-minute errored seconds TCA
ODU-TCA-SES—15-minute severely errored seconds TCA
ODU-TCA-UAS—15-minute unavailable seconds TCA
TIP: You can view OTU and ODU TCAs by using the show interfaces transport pm otn
operational-mode CLI command.
OT Interface Optics-Related Alarms and Status
Table 38 on page 113 and Table 39 on page 114.
107