Entrematic Ditec EL21 Installation Manual page 11

For ditec valorr-tenr automations installed in escape routes
Table of Contents

Advertisement

Output
2 x 12 V / 1.2 Ah
BAT
+
LK
-
+
AUX
-
Value /
Accessories
Anti-panic battery kit.
With the mains power supply off, with an alarm condition
(alarm
the automation performs an opening operation at low speed
unless in NIGHT-TIME CLOSURE mode.
In NIGHT-TIME CLOSURE mode, with the mains power sup-
ply off, the automation goes into an alarm condition (alarm
performing an opening operation.
To charge the batteries, connect the mains power and the
battery kit at least 30 minutes before starting the system.
WARNING: connect batteries, as described on pages 24 and
25.
to allow charging, the battery kit must be connected to the
control panel at all times. Periodically check the efficiency
of the battery kit.
Bistable blocking device. Bistable blocking device power
supply output.
24 V 1 A
WARNING: connect block auxiliary coil to AUX terminals, as
24 V 200 mA
described on pages 24 and 25.
Description
appears on the display with 5 acoustic signals),
appears on the display with 5 acoustic signals) without
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents