Advertisement
2 SAFETY ADVICE
2.1
The KTM PowerPack does not contain any parts that require maintenance. Do not open the KTM PowerPack
under any circumstances.
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. For example: gear segment (70029032000)
During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals and seal rings, O-rings, pins, lock
washers) must be replaced by new parts.
In the case of certain screws, a screw adhesive (e.g. Loctite
must be followed.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged
or worn parts.
After you complete the repair or service work, check the operating safety of the vehicle.
2.2
A number of safety instructions need to be followed to operate the product described safely. Therefore read this
instruction and all further instructions included carefully. The safety instructions are highlighted in the text and
are referred to at the relevant passages.
2.3
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
2.4
Use the operating and auxiliary substances (such as oils and lubricants) specified in the Owner's Manual.
4
Work rules
Safety advice
Info
Various information and warning labels are attached in prominent locations on the product described. Do
not remove any information or warning labels. If they are missing, you or others may not recognize dangers
and may therefore be injured.
Degrees of risk and symbols
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
Fuel, auxiliary substances
®
) is required. The manufacturer instructions for use
Advertisement
