Advertisement
–
Have a lift stand available.
Lift stand (78129955100)
–
Carefully loosen and remove the tension belt of the footrest
bracket.
Info
An assistant prevents the motorcycle from falling over.
F01844-10
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
Info
The procedure in the event of transport damage is
described in the customer service manual.
402050-01
–
Remove the spare key and KEYCODECARD keep in a safe place
for the handover.
–
Loosen rubber strap
F01849-10
–
Disconnect the plug-in connector
plug-in connector
–
Lay down the headlight mask carefully to the side and protect
from damage.
E00971-10
–
Make sure that the reflectors are glued on to the left and right
fork leg.
»
If there are no reflectors stuck on:
–
Stick on the reflector.
F01234-01
1
and tilt the headlight mask forwards.
2
of the headlight and the
3
of the ignition lock.
Info
The reflectors must not be covered by trim
parts.
SETUP 3
7
Advertisement
