Advertisement
4 WORK
4.1
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
4.2
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
18
Raising the motorcycle with a lift stand
401942-01
Removing the motorcycle from the lift stand
401943-10
Preparatory work
–
Deactivate the vehicle.
–
Fold the seat up.
(
p. 22)
–
Remove the KTM PowerPack.
(Option: HV 2 technical personnel)
–
Ascertain that the KTM PowerPack is at zero potential.
(
p. 36)
–
Ascertain that the discharge plug is de-energized.
(
p. 37)
–
Mount the protection cap.
Main work
–
Use the motor guard underneath the motor to raise the vehicle.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
Main work
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with the rubber strap.
Finishing work
–
Install the KTM PowerPack.
(Option: HV 2 technical personnel)
–
Perform an equipotential bonding check (KTM PowerPack
installed).
(
p. 37)
–
Lock the seat.
(
p. 22)
(
p. 19)
(
p. 29)
(
p. 19)
1
to the ground
(
p. 30)
Advertisement
