Page 1
HUAWEI TE30 Videoconferencing Endpoint Quick Installation Guide What's in the Box HUAWEI TE30 Power adapter Power cable videoconferencing endpoint L-shaped bracket, 1/4"-UNC Accessorial integration cable HDMI cable screw, and hook-and-loop fastener Network cable Remote control Qualification Card Warranty Card...
Page 2
Installation Standard Mounting Use the L-shaped bracket and hook-and-loop fastener to secure the TE30 on top of the monitor. Select an installation option based on the monitor width. If the thickness of the monitor is 97 mm (3.82 in.) or slimmer, follow the steps in the...
Page 3
Free-Standing Place the TE30 on a flat surface. If you have to place the TE30 on an inclined surface, ensure that the inclination is less than 15° so that the TE30 can function properly.
Page 4
Wall-Mounted Use the L-shaped bracket to wall-mount the TE30. Before mounting the TE30 onto the wall, connect all required cables to the TE30. Inverted Installation Purchase a bracket for inverted installation and mount the TE30 onto the ceiling. Use the 1/4"-UNC screw to secure the TE30 to the bracket.
Connecting Cables The VGA cable is not provided with the TE30. You need to purchase it by yourself. Visit The cable connection shown in the preceding figure is the simplest and provided only for reference. to access the http://enterprise.huawei.com HUAWEI TE30 Videoconferencing Endpoint User Guide for more cable connection instructions.
Page 6
2. When Popup prompts, click Yes. The TE30 automatically loads the configuration file and restarts. If you do not perform any operations within 10 seconds after you insert a USB flash drive, the TE30 automatically loads the configuration file and restarts.
Need help?
Do you have a question about the TE30 and is the answer not in the manual?
Questions and answers