Serv." Register (Service) - Honeywell DL230 Operating Instructions Manual

Operation

6.4.5 "Serv." register (Service)

This register is used to display, check and configure special device settings
and conditions. This application is only intended for service technicians
(specialists) or a calibration officer for putting the device into operation or
maintenance.
Display
Input 1
Input 2
Input 3
Input 4
Tariff programs Sub-menu for revaluation and the corresponding
Measured
values
Archives
Status
Date and time
Batteries
Outputs
Interfaces
Device settings Sub-menu for all device settings
Identification
Edit and delete
Data book
Description
Sub-menu for values and parameters for input 1
Sub-menu for values and parameters for input 2
Sub-menu for values and parameters for input 3
Sub-menu for values and parameters for input 4
parameters
Sub-menu for measured values and the corresponding
parameters
Sub-menu for existing archives in the device
Sub-menu for current status, status register and logs
Sub-menu for date, time and the corresponding
parameters
Sub-menu for the device battery and the corresponding
parameters
Sub-menu for both outputs and the corresponding
parameters
Sub-menu for existing interfaces in the device
Sub-menu for the identification of the gas system
Sub-menu to activate a range of delete functions
Sub-menu with information from the device data book
67