Advertisement
Once the 4 screws are removed the Processor board can be pulled away from the Mother board. The board can be
folded down to rest on the bench with all cables still attached.
Fig 3 QX Recorder
Inverter
Connector
QX Recorder
Carefully remove the inverter connector by gently pulling upwards. Pull on the connector body, not on the
cables.
Carefully remove the touch screen connector by gently pulling upwards. Pull on the connector body, not on the
cables.
To remove the display connector the top of the connector is pulled up to release the flat cable.
The Processor board should now be free and can be removed.
SX Recorder
Carefully remove all the connectors by gently pulling upwards. Pull on the connector body, not on the cables.
The Processor board should now be free and can be removed.
Remove the internal compact flash card and if necessary fit to the new Processor board.
Remove the user accessible compact flash card if fitted and replace in the new board.
43-TV-33-58 i
ss.1 GLO June 06 UK
Fig 4 SX Recorder
Display
Connector
Touch screen
Connector
4
Advertisement
