Environmental Protection; Operator's Responsibility - Honeywell DL230 Operating Instructions Manual

18

2.6 Environmental protection

CAUTION!
Environmentally hazardous substances!
If environmentally hazardous substances are handled incor-
rectly this may cause significant damage to the environ-
ment, particularly if they are improperly disposed of.
Therefore:
– The instructions below should be observed at all times.
– Appropriate measures should be taken immediately if
The following environmentally hazardous substances are used:
–
Batteries
Batteries contain toxic heavy metals. These must be treated as special
hazardous waste and must be disposed of in municipal waste collection
points or by a waste specialist.

2.7 Operator's responsibility

The device will be used in the commercial sector. The operator of the
device will therefore be subject to legal obligations concerning occupational
safety.
i
Important information
To protect the device from unauthorized manual access,
make sure that only authorized persons have direct access to
the device after installation.
In addition to the safety information contained in these instructions, the
valid safety, accident prevention, and environmental protection regulations
for the area of application of the device, must be adhered to. In particular:
–
The operator must ensure that the valid safety, accident prevention,
and environmental protection regulations for the entire plant in which
the device is being integrated, are complied with.
environmentally hazardous substances are accidentally
released into the environment. In cases of doubt, please
inform the responsible local authority about the
damages.
Safety