Table of Contents
Advertisement
36
5.1.2 Assembly on a wall
The DL230 can be mounted on the wall without opening the
housing. The holes are accessible by pressing the grey cov-
ering strips on both the right and left-hand side of the cover
out-wards at the small groove.
III. 7
1. Bore four holes in the positions marked on the wall (see dimensions
in III. 7).
2. Select wall plugs, which correspond to the size of the screws and
insert these in the boreholes in the wall.
3. Use four universal screws 50mm x 5mm for attaching the DL230 to
a wall.
Assembly, Connection and Putting into Operation
Advertisement
Table of Contents
