Connecting The Peripheral Drive Cable - Star Micronics TSP552 User Manual

4-2. Connecting the Peripheral Drive Cable

Note: Before connecting/disconnecting the peripheral drive cable, make
sure that power to the printer and all the devices connected to the
printer is turned off. Also make sure the power cable plug is discon-
nected from the AC outlet.
(1) Connect the peripheral drive cable to the connector on the rear panel of the
printer, and pass it through the cable hole provided at the bottom of the printer
cover.
Note: Make sure that the peripheral drive cable is passed through the hole.
Failure to do so may cause the cable to be squashed by the printer,
resulting in damage to the cable.
– 6 –