A-4. Power Supply; A-5. Environmental Requirements; A-6. Reliability - Star Micronics TSP552 User Manual

A-4. Power supply

(1) AC Adaptor
(2) Input
(3) Output
(4) Plug
Important!
• When using a printer power supply other than the optional AC adaptor
(PS48-24A), be sure that the following cautions are observed.
• Use a power supply of DC 24 V 5% and more than 2.0 A.
• Be careful about installing the printer in an area where there is noise.
Take the appropriate measures to protect against electrostatic AC line
noise, etc.
• The optional cable set can be connected.

A-5. Environmental requirements

(1) Operating
Temperature
Humidity
(2) Transport/storage (when packed)
Temperature
Humidity
Note: The maximum wet-bulb temperature must 29 C or less.

A-6. Reliability

(1) MCBF
(2) Printer life
(3) Print head life
(4) Cutter life
Operating conditions for above reliability
a) 500 patterns/day
b) 25 line feeds and 1 cut per pattern
c) Powered on for 10 hours per day
d) 340 days/year
e) Print duty 16.5% or less
PS48-24A, switching type
90 to 264V AC, 50/60Hz
24V DC 5%, 2.0A
3-pin POWER JACK TCP 8927 (Hoshiden brand or
equivalent.)
5 C to 40 C
10% to 85%
-20 C to 60 C
5% to 95%
37.5 million lines
25 million lines
120 km (with designated paper)
1.5 million cuttings (with designated paper)
– 96 –