A-1. General Specifications
(1) Printing method
(2) Print speed
(3) Dot density
(4) Number of print columns
(5) Roll paper
(6) Cutter
(7) Sensor
(8) Overall dimension
(9) Weight
A-2. Print Specifications
(1) Print width
(2) Character size
(3) Column pitch
(4) Character set
(5) Character enlargement/reduction
A-3. Interface
(1) Interface
(2) Command
Appendix A: Specifications
Direct line thermal printing
105 mm/s
Note: Print duty is 16.5% or less.
8 dots/mm (0.125 mm/dot)
48
Refer to chapter 3 for details on the recommended
paper.
Paper width: 80
Roll diameter: ø83 mm or less
External diameter of core: ø18
Internal diameter of core: ø12
Partial cut (leaving the center of the paper intact)
Paper end, cover open, paper near end
142 (W)
215 (D) 149 (W) (mm)
Approx. 2.2 kg
72 mm
1.25W 2.75H (mm)
1.5 mm
Numeric, alphabet, kana, special, ruled line symbols,
extended graphic, international, user characters
double width, double height, double size
RS232C serial interface
TM
ESC/POS
– 95 –
0
mm
- 1.0
+0.5
commands or Star commands
mm
0
0.5 mm