Drying - KaVo MASTERtorque Mini LUX M4500L Instructions For Use Manual

7 Preparation methods according to ISO 17664
▶ For program settings as well as cleansers and disinfectants to be
used, please refer to the Instructions for Use of the thermodisinfector
(complying with max. pH value of 10).
▶ In order to prevent negative effects on the medical device, make sure
that the interior and the exterior of the medical device are dry after
completion of the cycle, and then grease it immediately with servicing
agents from the KaVo care system.

7.4 Drying

Manual drying
▶ Blow off the outside and inside with compressed air until no water
drops are visible.
57 / 78