Setting Left And Right Margins; Table 7-1 Horizontal Tab Commands; Table 7-2 Left And Right Margin Commands - Star Micronics SG-10 User Manual

Table 7-1
Horizontal tab commands
1 Function 1 Mode 1 Control code I
Advance to next tab position STAR 1 CHR$(9)
IBM I CHRS(9)
Set tabs at
nl, n2,
etc.
111
One-time tab of n spaces STAR <ESC > "b" CHR!$(n)
IBM
<ESC> "b" CHRS(n)
Note: If your computer does not support lowercase characters, use
CHR$(98) for "b."
SETTING LEFT AND RIGHT MARGINS
SG-10/15's left and right margins work just like a
typewriter-once they are set all the printing is done between them.
The commands to set the margins are given in the following table:
Table 7-2
Left and right margin commands
<ESC> "Q"
CHR$(n)
Note: If your computer does not support lowercase characters, use
CHR$(lOS) for "1".
Try
setting SG-10/15's margins with this program for STAR
mode:
19, 'Demo margins.
20
GOSUB 70
30 LPRINT CHR$(27) "M" CHR$( 18) ; 'Left margin = 10.
40 LPRINT CHR$(27) "Q" CHR$(7@) ; 'Right margin = 70.
50
GOSUB 70
60
END
70
FOR I = 1 TO 80
80 LPRINT "X" ;
90 NEXT I
100 LPRINT
63