Star Micronics SG-10 User Manual page 16

-'-, - _ _.
-
-
-
-
-
-
-
Figure 1-8.
The eyelet should be between the ribbon spool and the
changeover lever.
-
Prin; head
Figure l-9. You may want to use a ballpoint pen to press the ribbon
guide towards the platen and work the ribbon down beside it.
Finally, se' the other spool snugly on the opposite spool holder;
then turn tile spools by hand four or five turns in each direction
to verify that everything is properly set and ready to roll.
8