Table of Contents
Advertisement
The program works just the same as before, but the line spacing
are just half (STAR mode) or one-third (IBM mode) what they
were. This is because < ESC > "3" CHR$(n) sets the line spacing
to n/144 inch in the STAR mode, or n/216 inch in the IBM mode.
Table 6-2 shows all the line spacing commands,
including
several "shortcut"
commands
for commonly
used line spacings.
Table 6-2
Line spacing commands
Set line spacing to n/l2 inch
Note:
If your computer
does not support lowercase characters.
use
CHR$(97) for "a."
H Moving down the page without a carriage return
So far, all the commands
that move the paper also move the
print head to the left margin. And normally
this is what you
want. Sometimes, though, you may wish to move down the page
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
