Setting The Left And Right Margins; Connecting The Printer - Star Micronics NB-15 User Manual

24
you can reset it by the following procedures.
1. Set the Off Line mode by pressing the On Line key.
2. While holding the Print Pitch key, press the TOF key.
Your printer acknowledges the new top of form with the
sound of beep.
n Setting the left and right margins
As you'll learn in Chapter 5, you can set the left and right
margins with the control codes. In addition, you can set them
manually just like a typewriter by the following procedures.
1. Set the Off Line mode by pressing the On Line key.
2. While holding the Mode key, press one of the following
keys.
TOF key-Left margin set
Paper Feed key-Right margin set
3. While holding the two keys, the print head moves across
the page step-by-step.
4. When the print head goes to the position where you want
to set margin, release the two keys. So the printer
acknowledges the margin with the sound of beep.
CONNECTING THE PRINTER
Now that you've assembled and tested your printer, you're
surely looking foward to using it forward what you bought it for -
printing! We're almost there - just connect it to your computer
as follows:
Figure 2- 14.
Connect the cable like thm
-