Advertisement
Getting Assistance from Keysight
This upgrade adds noise figure measurement capability to your Option 217,
Option 219, Option 222, or Option 224 2-port analyzer by adding Option 029
which includes:
— a noise down converter and noise receiver
— a splitter to provide a signal to the noise down converter/receiver
— a bypass switch to each source port channel
Refer to
Getting Assistance from Keysight
Installing this upgrade kit requires special skills and experience. If you think
you may not be qualified to do the work, or need advice, contact Keysight.
Contacting Keysight
Assistance with test and measurements needs and information on finding a
local Keysight office are available on the Web at:
http://www.keysight.com/find/assist
If you do not have access to the Internet, please contact your Keysight field
engineer.
If You Have Problems With the Upgrade Kit Contents
Keysight stands behind the quality of the upgrade kit contents. If you have
problems with any item in the kit, refer to
Keysight (
6
"Overview of the Installation Procedure" on page
This repair must be done at a service center or a self-maintainer service
center! Refer to
"Getting Assistance from Keysight" on page
In any correspondence or telephone conversation, refer to the Keysight
product by its model number and full serial number. With this information,
the Keysight representative can determine whether your product is still
within its warranty period.
) link.
15.
6.
www.keysight.com
and the Contact
Installation Note N5242-90120
Advertisement
