Section 3 − Definitions; Additional Safety Symbols And Definitions - Miller Multimatic 200 Owner's Manual

3-1. Additional Safety Symbols And Definitions

.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Drive rolls can injure fingers. Welding wire and drive parts are at welding voltage during operation − keep hands
and metal objects away.
Beware of electric shock from wiring.
When power is applied failed parts can explode or cause other parts to explode.
V
>5min
Notes
SECTION 3 − DEFINITIONS
V
V
Become trained and read the instructions before working on the
machine or welding.
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, AND check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Safe1 2012−05
Safe95 2012−05
Safe94 2012−08
Safe26 2012−05
Safe40 2012−05
Safe43 2017−04
OM-253392 Page 9