Table of Contents
Advertisement
38
@ :
Spreadsheet
Title
: Page 1)
And, on August 12, 1986, the results might look like this:
12-Aug-86
Spreadsheet
Title
Page 1
Another of the selections under Options is Setup. This selec-
tion allows you to create a setup string that will be sent to the
printer before each section of the spreadsheet
is printed. You
can include non-printing
codes in the setup string by using a
backslash (\) followed by a three digit number that consists of
the decimal ASCII value for the code that you wish to send (with
leading zeros if required). For example, to print a worksheet
in
condensed
print, use the setup string \015.
This sends ASCII
15 which is the code for condensed printing. The following table
shows how many character columns will fit with different print-
ing width, and the setup string to get each width.
Table 3-2
Print columns on a page with Lotus l-2-3
-
USING THE PANEL MODES
At the end of this chapter,
we'll explain about the "Panel"
mode, which is powerful function of the printer. Some commer-
cial software does not support defining your own selections. In
Advertisement
Table of Contents
