Table of Contents
Advertisement
ASCII decimal values to turn on and off different
prints. You
want to affect that aspect but not the print pitch itself. Leave
that for your document ruler line. Remember,
all the codes can
be found in Appendix D of this manual.
Also, keep in mind that print control keys can be combined in
your document
such as boldface and underline.
EasyWriter
II
uses three methods
of highlighting
on the display screen.
It
highlight, underlines
and shows reverse image characters.
You
cannot
combine
print
control
functions
that use the same
method of highlighting.
For example,
in our definitions,
underline
and. expanded
prints
are both
displayed
as underlined
on the
screen.
Whichever
function you use last will cancel out any previous
modes.
USING THE PRINTER WITH WORDSTAR
(Note: If you have not read the "General Concepts" section in
this chapter, you should do so before continuing.)
This printer supports
many of the standard WordStar
print-
ing capabilities without requiring any changes. You can:
1. Print documents
from the No-File Menu.
2. Use dot commands
except
for lines per inch and
characters
per inch.
3. Print
boldface,
underline,
double-strike,
strikeout,
superscript
and subscript characters
as well as use print
pause.
4. Select and print variable information
for marge letters,
etc.
n User-defined
print commands
There
are
several
CONTROL-P
( * P) commands
that
automatically
work with this printer and require no changes.
They_ include:
PS Underscore
* PB Boldface
- PD Double-strike
^ PT Superscript
1 PX Strikeout
PV Subscript
* PC Print Pause
Advertisement
Table of Contents
