Star Micronics NB24-10/15 User Manual page 41

32
transferred to the Edit Line Spacing screen. Do not change
these codes. They define how many lines per inch the printer
uses. Press RETURN to transfer to the Edit Font Support
screen.
Change all of the entry fields to Option 2 (Control Code Sup-
port) on the Edit Font Support screen. Also, make changes in
the other fields to look like the figure shown below. Enter the
(italic) codes for lines 41 - 50.
-
41. Bold/Shadow Face Support [2]
42.
Single Underline Support [Zj Using Character [
95 ] - _
43. Double Underline Support [2l Using Character [0 ]
44. Overstrike Support [2j Using Character from
45. Special (Color) Support [ 21 System Parameters
-.
46. Sub/Superscript Support [ 2j
47. Will underline retain font (Y) or be normal font (N)?
[Iti
49. Start double underline [
]
50. After double underline [
]
When you have finished, press RETURN and the Edit Font
Sequences screen will be displayed. Here you will define print
control codes for use in your documents. As with the pitch set-
tings,
ASCII decimal values are used that correspond to the
print function assigned to each control
key. Table 3-l shows the
current control function, the print function we will assign
to it
and the keyboard keys used.
Table 3-1
EasyWriter II control keys
Enter the (italic) codes for lines 51 - 66.