Star Micronics LC24-15 User Manual page 52

Select character set #2
Mode ASCII Decimal Hexadecimal
Both <ESC> "6"
27 54 1B 36
Selects character set #2.
Select international character set
Mode ASCII
Decimal Hexadecimal
Std. cESC>
"R" n
27 02 n 18 52 II
IBM cFS> "R" II
20 02
n
1C 52 II
.-
Selects an international character set according to the value of n.
n Character set
0 U.S.A
1 France
2 Germany
3 England
4 Denmark1
5 Sweden
6 Italy
n Character set
7 Spain I
8 Japan
9 Norway
10 Denmark II
11 Spain II
12 Latin America
13 Denmark/Norway
The first eight of these character sets (from U.S.A. to Spain I) can
be selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
1
Mode ASCII
Decimal Hexadecimal
IBM
cESC> 'Y' nl n2
27 92
nl
n2 1B 5C
nl n2
-
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered __
control codes. This command remains in effect for the next nl + n2
x 256 characters, where nl and n2 are numbers between 0 and 255. -
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
-
44