Star Micronics LC24-15 User Manual page 63

Execute <ES& "A"
Mode ASCII Decimal Hexadecimal
IBM <ESC> "2"
27 50 1B 32
Sets the line spacing to the value defined by the last preceding
<ES0 "A" command. Sets the line spacing to l/6 inch if there is
no preceding <ES0 "A" command.
Line feed
Mode ASCII Decimal Hexadecimal
Both <LF>
10 OA
Prints the current line and feeds the paper to the next line. If DIP
switch 1-2 is ON, also moves the next print position to the left
margin. See the preceding commands for the line spacing.
Reverse line feed
Mode
ASCII
Decimal Hexadecimal
Both <ES& <LF>
27 10 1B OA
Prints the current line and feeds the paper in the reverse direction to
the preceding line. If DIP switch l-2 is ON, also moves the next print
position to the left margin. See the preceding commands for the line
spacing. Ignored when friction feed is used.
Sleet forward feed mode
Mode
ASCII
Decimal Hexadecimal
Std. <FS> "F'
20 70 1C 46
Cancels the reverse feed mode and selects forward feed mode. This
is the default setting at power-up.
Select reverse feed mode
Mode ASCII
Decimal Hexadecimal
Std. cFS>
"R"
26 02 1C 52
Selects reverse feed mode. Reverses the direction of all vertical
movements. Ignored when friction feed is used.
55