Star Micronics LC24-15 User Manual page 64

Perform one n/180-inch or n/2164nch line feed
Mode ASCII
Decimal Hexadecimal
Both <ESC>
"J' n
27 74 n jlB4A n
Feeds the paper once by n/180 inches (standard mode) or n/2 16
inches, where n is between 1 and 255. Does not move the print
position right or left when DIP switch l-2 is OFF. Does not change
the line-spacing setting.
Perform one n/216-inch reverse line feed
Mode ASCII Decimal Hexadecimal
Std. <ESC> "'j" n
27106
n IB
6A
n
Feeds the paper once by n/21 6 inches in the reverse direction, where
n is between 1 and 255. Does not move the print position right or left
when DP switch l-2 is OFF. Does not change me line-spacing
setting.
Feed paper
n
lines
Mode ASCII Decimal Hexadecimal
Both
<ESC> "f' "1" n
27 102 49
n
1B 66 31
n
-
<ESC> "f' <l> n
27 102 1
n
18 66 01 n
Feeds the paper n lines from the current line, where n is between 0
and 127.
Set top of page at current position
Mode 1 ASCII
Decimal
Hexadecimal
IBM 1 <ESC> "4"
1 27 52 1 1B 34
Sets the current position as the top-of-page position. Note that this
can also be done from the control panel.
56