Table of Contents
Advertisement
Loadingthepaper from the bottomof theprinter
You can load the fanfold paper fmm the bottom of the printer with the
followingprocedure.
1. Removethe top coverand the rollerunit.
2. Opentherearcover usingthetwo gripsat the side,andpushbackwards.
3: Grip the positioningleverson both sideof the tractorunit, andpull the
unit upwardsas shownin Figure 1-15.
POsitiOning lever
Figure
1-75. Pull up the tractor unit for bottom feeding
4.
5.
6.
Place a stack of fanfold paper below the printer.
With the tractor covers open, mount the paper from the bottom of the
printer, by aligning holes with the pins on the tractor unit.
Adjust the spacing of the tractor units by sIidingthem along the bar, using
the clamp lever at the back of each unit to release and lock them in
position. When the lever is up, the unit is released, and when it is down,
the unit is locked.
15
Advertisement
Table of Contents
