Table of Contents
Advertisement
chapter 1
SETTING UP THE PRINTER
Subjects covered in Chapter
1
include —
.
Locatingthe printer
Unpackingand inspection(partnames)
Settingup and comecting
Loadingsinglesheets
Loadingand parkingfanfoldforms
Adjustingthe printinggap
LOCATING THE PRINTER
Beforeyou startunpackingand settingup yourprinter,make surethat you
have a suitableplaceon whichto locateit. By "a suitabIeplace",we mean:
.0
A firm, level surfacewhichis fairly vibration-free
Away from excessiveheat (such as directsunlight,heaters,etc)
Away from excessivehumidity
Away from excessivedust
Supplyit with"clean"electricity,Do not connectit to the samecircuitas
a large, noise-producingappliancesuch as a refrigerator.
Make sure the line voltage is the voltage specified on the printer's
identificationplate.
To disconnectthe printerthe plug has to be disconnectedfrom the wall
socket,whichhas to be locatedcloseto the printer,and easy to access.
Install the printer where there is sufficientroom for the paper and any
paper being fed in or printedout.
If youareconnectingyourprinterwithaparallelcable,makesurethatthe
cable is within2m (6ft) of the printer.An RS-232connectionusing the
optionalSPC-8Kinterfacecan be made overlongerdistances.
Advertisement
Table of Contents
