Table of Contents
Advertisement
I
LOADING AND PARKING FANFOLD FORMS
Fanfold forms have holes along the sides and perforationsbetween the
sheets.They are also called sprocketforms, punchedforms, or just plain
"computerpaper".This printeracceptsformsup to 10"wide.This section
will take you throughthe proceduresfor loading,parking and unparking
fanfoldforms.
Loadingthepaper from the rear of theprinter
Youcanloadthe fanfoldpapereitherfromtherearor fromthebottomof the
printer.If you are goingto loadthe paperfromthe bottom,refer to the next
section.
1. Placea stackof fanfoldpaperbehindandatleast onepage-lengthbelow
the printer.
2. Turn the printer'spower OFF.
3. Pushthe releaseleverforward.Thishas theeffectof releasingthepaper
from the platenroller, and engagingthe tractorfeed.
4. Removethe paper guideand put it asidefor the moment.
5. Removetherearcoverusingthe twogripsoneitherside, andpushback-
wards as in Figure 1-11.
Figutu
1-71.
Removing the rear cover
Advertisement
Table of Contents
