Manualloading
It is
alsopossibletoloadpapermanuallywhiletheprinter'spowerisoff.The
procedureis:
1. Place the paper guide in positionby insertingthe tabs, locatedon the
bottomof the assembly,into the slotson the rear coverof the printer.
2. Checkthat printerpower is off and the releaselever is back.
3. Adjustthe paper guidesto match the size of paper you will be using.
Rememberthatprintingwillstartsomedistancefromtheleft-handedge
of the carriage.
4. Place a singlesheetbetweenthe guides,placingthe side on whichyou
wantto printtowardsthebackoftheprinter.Gentlypushthepaperdown
in the guidesuntil you feel it stop.
5. Turn the platenknob clockwiseuntilthe frontedgeof the papercomes
out from underthe top cover.
6. If the paper is not straight, move the release lever forward, then
straightenthe paper by hand and movethe releaselever back.
11