ADJUSTING THE PRINTING GAP
The distance between the print head and the platen can be adjusted to
accommodate differentPaperthicknesses. T o makethis adjustment, r emove
the
m
cover. T head.ju~tient leverislocatedattheleftSideOfthe
Printer
.
mechanism. Pushing the adjustmentlever backwards narrows the gap;
pullingit forwardswidensthe gap.
There are five positions, and you can feel the lever clicking into each
position.The secondpositionfromtherear is the onemostcommonlyused
for single sheets of paper. Try differentpositionsuntil you get the best
printingresults.(Do not set the lever out of the markedpositions.)
I
Figure 1-17. Location of the adjustment lever