SEITING UP
Place the printer in the desiredlocation,and remove all packingmaterial
from inside the top cover. This packing material is intendedto prevent
darnageto theprinterwhilein transit.Youwillwantto keep allthepacking
material,alongwiththe printercarton,in caseyouhaveto movethe printer
to a new location.
Mountingtheplaten knob
The platenknobis packedinto a recessof the whitefoampackingmaterial
whichheld yourprinterinsidethe carton.Be sureto removethe knobfrom
the packaging.
Mountthe knob on the platenshaft,whichis on the right-handside of the
printer. Rotate the knob on the shaft before pushingthe knob fully into
position.
1
Figure
1-3. Mounting the platen knob
Install the ribboncartridgeand the roller unit
.
Removethe top coverby liftingup the front (usingthe two gripson either
side),and pullingthe covertowardsyou (see Figure 1-4).Now installthe
ribbon.(Ifyouwantto printwithblackonly,installthemonochromeribbon
cartridge,2X9.)
4
—