Table of Contents
Advertisement
I
3. Press and hold the ( ON
LINE )
button.
4. Whileholdingthe ( ON
LINE
)button down,press the (-)
button,
then release both buttons at the same time. The printer will beep to
indicatethat the top-of-formpositionhas been set.
Forwardmicro-feed
For finealignment,youcan feedthepaperforwardin very smallincrements
as follows:
1. Press the~
ON LINE )
buttonto set the printeroff-line.
2. Press the ( ON
LINE )
buttonagain and hold it down.
3. Whileholdingthe c ON
LINE )
buttondown,pressthe (PAPER FEED]
button.The paper will start advancingin a series of smallsteps. When
you want to stop, releaseboth buttons.
Reversemicro-feed
You can also feed the paper in small incrementsin reverse,to return to a
higherpositionon the same page.
NOTE: Withfanfoldforms,do nottryto returnto apreviouspage.Theper-
forationmay catch insidethe printerand cause a jam.
1. Press the (
ON LINE )
buttonto set the printeroff-line.
2. Press the( ON
LINE )
button againand hold it down.
3. Whileholdingthe ( ON
LINE )
buttondown, press the (
Sk&AE~:~T
)
button.Thepaperwillstartmovingbackwardsin a seriesof smallsteps.
When you want to stop, releaseboth buttons.
Changingthe auto loading value
Normally,the printer automaticallyloads the paper one line from the top
edge.
If you want to changethis value, followthis procedure:
1. Load the paperusingthe ( s,~k=~~c,r ) button.
2. Changethe print positionusing the micro feed function.
The line on the card holderhelpsyouto alignthe baselineof characters
to be printed.
3. Afteryouget thedesiredposition,pressthe(
ON LINE )
buttonto save
the value.
Advertisement
Table of Contents
