Table of Contents
Advertisement
I
chapter 1
SETTING UP THE PRINTER
Subjects covered in Chapter 1 include —
Locatingthe printer
Unpackingand inspection(part names)
Settingup and connecting
Loadingsinglesheets
Loadingand parkingfanfold forms
Adjustingthe printinggap
LOCATING THE PRINTER
Beforeyou startunpackingand settingup yourprinter,make sure that you
have a suitableplaceon whichto locateit. By "a suitableplace",we mean:
A firm, level surfacewhichis fairly vibration-free
Awayfrom excessiveheat (such as directsunlight,heaters,e(c)
Away from excessivehumidity
Away from excessivedust
Supplyit with"clean"electricity.Do not connectit to the samecircuitas
a large,noise-producingappliancesuch as a refrigerator.
Make sure the line voltage is the voltage specified on the printer's
identificationplalc.
To disconnectthe printerthe plug has to be disconnectedfrom the wall
socket,whichhas to be locatedcloseto the printer,and easy to access.
Installthe printer where there is sufficientroom for the paper and any
paperbeing fed in or printedout.
If youareconnectingyourprinterwitha parallelcable,makesurethatthe
cableis within2m (6ft) of the printer.An RS-232connectionusing the
optionalSPC-8Kinterfacecan be made over longerdistances.
1
Advertisement
Table of Contents
