Table of Contents
Advertisement
I ::
2.7 ADJUSTING
PRINT QUALITY
At some time you may find that the quality of the printing is not what you
want. You may run test prints and then make the printing lighter or darker by
adjusting the the print density adjustment lever located inside the printer.
1. Hold the knob of the multi-purpose
tray and pull it to open the tray.
2. Press the release button (at the right) upwards and open the cover.
..-.
3. To increase print density, move the density adjustment lever to the right.
To reduce the density, move the lever to the left.
Advertisement
Table of Contents
