Table of Contents
Advertisement
-
9.2 EXPANSION RAM BOARD
Three kinds of memory
expansion
board are available
for the printer:
a 1 MB
RAM board, a 2 MB RAM board and a 4 MB RAM board. These RAM board
permit printing
of full page graphics.
To tell whether
a board is installed
in
your printer,
watch the printer
display
screen during
power-up.
If no board
has been installed,
the display
will read:
Memory Test 1 MB
If a memory
board has been already
installed,
the display
will give the total
amount
of memory
available
(for example):
Memory Test 5 MB
9.3 FONT CARTRIDGE
Fonts can be added to the printer by installing
an optional
font cartridge.
The
font cartridge
is installed
in the slot beneath
the control
panel
of the Star
LaserPrinter
4111.
Insert the font cartridge
with the arrow label facing up. If the font cartridge
is inserted
upside down, the cartridge
and/or printer
may be damaged.
CAUTION:
The Font Cartridges
for LaserPrinter
8 series cannot
be used
with this printer.
96
Advertisement
Table of Contents
