Installing The Ep-L Cartridge - Star Micronics LaserPrinter 4III Operation Manual

Star micronics laser printer operations manual
Hide thumbs Also See for LaserPrinter 4III:
Table of Contents

Advertisement

2. Lift the multi-purpose
tray and close it until it latches on both sides.
-
2.2 INSTALLING THE EP-L CARTRIDGE
Important Notice
l
Install the EP-L cartridge immediately
after opening the aluminum bag.
Permanent damage can be caused by light to the photosensitive
drum.
NEVER expose the cartridge to the strong light (more than 15000 lux) or
room lighting (1000 lux) for more than five minutes.
l
Do not open the drum protective shutter on the EP-L cartridge.
-
l
Keep the cartridge away from CRTs, disk drives, diskettes, etc. Other-
wise, CRTs and disk drives can be damaged, and data on diskettes can be
-
destroyed by the magnet inside the cartridge.
l
When handling the cartridge,
do not touch the bottom of the EP-L
cartridge. Print quality will be adversely affected if the protective shutter
-
is open and the drum is damaged. The drum can also be damaged if it
-
exposed to light.
l
Always keep the EP-L cartridge with the label facing up. Do not turn it
upside down or stand it on end. The toner may become caked, and this
causes print quality to deteriorate.
l
Use the cartridge before the expiry date printed on the carton. Otherwise,
print quality may deteriorate.
l
Use only genuine EP-L cartridges as recommended
by your supplier.
-
16

Advertisement

Table of Contents
loading

Table of Contents