Table of Contents
Advertisement
[e] displays these op-
l
Then press [A] displays BAUD RATE. Pressing
tions:
DATA BIT
PARITY
STOP BIT
PROTOCOL
ROBUST-XON
DTR POLARITY
-
The settings from the factory for these options are:
8 bit
no parity
1 stop bit
DTR
High
Whenever you want to change any of the serial parameters, follow the same
sequence as for selecting the baud rate. For example, to change the data bit,
at SERIAL press [v] then [<I until DATA BIT is displayed on the screen.
Pressing [v] will display the first option, and [c] will give the rest of them.
Press [v] when your choice appears on the screen. Finally, press [ON LINE],
which readies the Star LaserPrinter
4111 for printing.
If your applications program requires an
XON/XOFF
handshake ("software"
rather than DTR "hardware"),
set it from the SERIAL menu by
l
Pressing [v] then [<] until you see
PROTOCOL
l
Pressing [v] displays
DTR
l
Pressing [<I until the display rends XON/XOFF. Press
[v]
to execute.
-
50
Advertisement
Table of Contents
