Display Of Power-Assist Mode; Battery Charge State Indicator - Derby cycle Impulse User Manual

Increase power assist
Each time you press the button with the arrow pointing
downwards, the assistance decreases by one level from
POWER through to the zero assistance level STAND BY.
Reduce power assist

5.1.3 Display of power-assist mode

The bottom row of LEDs on the right of the display next to
the buttons for selecting the power-assist level shows you
how much assistance the motor is currently providing.
Display of power-assist mode
DISPLAY
Assist level
› The LED on the right of the display lights up when
the highest level of assistance (POWER) is activated.
This means the assistance is working hard.
ASSIST LEVEL
POWER
SPORT
ECO
STANDBY; battery indicator
still lights up ( )
› The LED in the centre of the display lights up when
the medium assist level (SPORT) is activated. This
means the assistance is working with a medium
level of effort.
› The LED on the left of the display lights up when
the lowest assist level (ECO) is activated and the
assistance is working with a low level of effort.
› If the assistance is switched off (stand by), only
the charge state indicator LEDs remain lit. You now
receive no assistance at all from the motor.

5.1.4 Battery charge state indicator

The battery charge state indicator is located above the
row of LEDs that displays the power-assist mode.
Battery charge state indicator
• If all three battery charge state indicator
LEDs light up when the pedalling assistance is
switched on, the battery charge is between 100
and 80%.
• If the third LED flashes, the battery charge is
between 80 and 60%.
• If two LEDs are lit, the battery charge is still be-
tween 60 and 40%.
• If the second LED flashes, the battery charge is
between 40 and 20%.
• If only one LED is lit, the battery charge is be-
tween only 20 and 10%.
• If only one LED is flashing, the battery charge
is less than 10%. At this point you will notice a
slight loss of power.
V User Manual Impulse Pedelec 13