Park Brake - Club Car Onward Operator's Manual

The key switch controls the motor and electrical system. A key is used to select
the key switch position. The key can only be inserted or removed when the key
switch set to OFF.
POSITION
OFF
ON
ACC

PARK BRAKE

WARNING
The park brake is a variable position control that is used to make sure that a
vehicle does not move while parked.
To disengage the park brake, push the accelerator or brake pedal.
ONWARD HP 4-PASSENGER LITHIUM-ION
Operators Manual
TPCC01DL00EN019 (Edition A)
Normal position when the vehicle is not in use.
Electrical power from the battery is not available to power the motor or
electrical systems.
Note: Some electrical accessories operate independently of the key switch.
Normal position when the vehicle is in use.
After 30 minutes of no accelerator pedal operation, the vehicle will turn off.
To turn the vehicle back on, turn the key to OFF, then ON.
Electrical power from the battery is available to power some electrical
components. No electrical power is available to power the motor.
After 15 minutes, the vehicle will turn off.
FAILURE TO ENGAGE THE PARK BRAKE CAN CAUSE PROPERTY
DAMAGE AND SERIOUS PERSONAL INJURY. AFTER THE VEHICLE
STOPS, ENGAGE THE PARK BRAKE UNTIL IT IS FULLY ENGAGED
AND PREVENTS THE VEHICLE FROM MOVING.
UNINTENDED VEHICLE OPERATION CAN CAUSE SERIOUS
PERSONAL INJURY OR DEATH. THE PARK BRAKE WILL RELEASE
AUTOMATICALLY WHEN THE ACCELERATOR OR BRAKE PEDAL IS
PUSHED. PREVENT ACCIDENTAL ACCELERATOR OR BRAKE PEDAL
ACTUATION.
Vehicle Controls
CONDITION
Page 29
3
Park Brake