How To Make Strain Relief And Drip Loop; Inspection And Maintenance; Electrical Cords; Electrical Plugs And Receptacles - Club Car Onward Operator's Manual

Battery Charger
5

Inspection And Maintenance

HOW TO MAKE STRAIN RELIEF AND DRIP LOOP

1. Connect the AC cord (1) into the AC plug.
2. Supply sufficient AC cord to make a drip loop and strain relief.
3. Secure the AC cord to the battery charger with a plastic cable tie (2).
INSPECTION AND MAINTENANCE

ELECTRICAL CORDS

Examine electrical cords for wear and damage before use. Immediately replace electrical cords for:
• Cracks
• Cuts
• Frayed wiring
• Insulation damage
• Loose connections
• Splices
Make sure that the DC electrical cord has the warning tag attached and that the warning tag is
readable. Replace a missing or damaged warning tag immediately.

ELECTRICAL PLUGS AND RECEPTACLES

NOTICE
Examine electrical plugs for wear and damage before use. Immediately replace electrical plugs for:
• Bent pins
• Corrosion
• Cracks
• Loose connections
• Missing pins
Page 40
IF THE PLUG PINS ARE BENT, SPEAK WITH YOUR LOCAL DEALER
OR DISTRIBUTOR FOR REPAIRS. DO NOT TRY TO REPAIR THE AC
CORD PLUG OR PINS.
ONWARD HP 4-PASSENGER LITHIUM-ION
TPCC01DL00EN019 (Edition A)
Operators Manual