Table of Contents
Advertisement
5.A
Install the 10A fuse (3) into the fuse holder (1).
5.B
Connect the fuse holder to the red cover (2).
Note:
Removal of the high voltage interlock fuse will cause a fault code.
5.C
Turn the key switch to ON, then OFF to clear the fault code.
6.
Set the Run/Tow-Stow switch to RUN.
LOWER THE REAR OF THE VEHICLE
Before the rear of the vehicle is lowered:
• Use a jack rated for the vehicle.
To lower the rear of the vehicle:
1.
Place the jack in the center of the lift point.
ONWARD HP 4-PASSENGER LITHIUM-ION
Operators Manual
TPCC01DL00EN019 (Edition A)
Vehicle Maintenance
Maintenance Tasks
Page 67
8
Hide quick links:
Advertisement
Table of Contents
