Record Data - Actron CP9190 User Manual

Global OBD II Diagnostics
2. Select Display Lines.
UP or
•Use
key.
•Press
Changing Measurement Units
✓
Refer to "Changing Measurement Units" on page 3-8 of Using The
Scan Tool.

Record Data

✓
The Record Data function records PIDs while vehicle is parked or
being driven.
✓
The Record Data function is mainly used for diagnosing intermittent
driveability problems that cannot be isolated by any other method.
✓
The recording time varies. A recording consists of frames of data prior
to the trigger and several frames after the trigger.
✓
Some vehicles wait a long period of time to store a trouble code after
a driveability problem occurs. If the operator selected Trigger On
Codes when making a recording, the operator might not see any
drastic change in the data parameters before and after trigger point.
Two people must be in vehicle when driving. One to
!
CAUTION
drive and the other to operate the Scan Tool.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 9
DOWN arrow
ENTER.
Select Display Lines
1 Line 1 Line
2 Lines
3 Lines
4 Lines
5 Lines
6 Lines
7 Lines
4