GM Historic (OBD I) Diagnostics
❒
Review Data
❒
Print Data
•Read Codes
•Playback
✓
The above stored infromation can be reviewed for GM vehicles.
Refer to Review Data and Print Data in the Using the Scan Tool
section of this manual.
– Code Lookup
– Tool Setup menu
– English/Metric
– Contrast Adjust
– Beeper
– Setup User Key
✓
Some 1994 and 1995 vehicles use the 16-pin OBD II connector,
but are not OBD II compliant. They still use the OBD I application
software. Refer to Appendix B Data Link Connectors
✓
If the Scan Tool displays an Error Message, make sure the cables
and adapters are securely attached and the ignition key is on.
5
Cycle the ignition key to off for 10 seconds, then on. Attempt the
test selected again. If the problem remains, refer to Error
Messages on page 9-2
Datastream Menu
All items marked with "-" are covered either in section 3 or 4.
IMPORTANT
These items are not covered in this section.
❒
Datastream Menu
❒
View Data
❒
Record Data
– Review Data
– Print Data
– Tool Setup
5 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
.