Using The Scan Tool
2. Play Back Recording.
•Press
✓
On GM Historic and Ford Historic
vehicles, you must select the data to
playback as an Entire Data List or
Custom Data List.
✓
3
The Playback has frame number
and timestamp (in seconds).
❒
Negative frames and
timestamps indicate data
recorded before trigger event.
❒
Positive frames and
timestamps indicate data
recorded after trigger event.
❒
Use
keys to view recorded PID data of each frame.
❒
Use
through frames.
❒
If graphing is available for
selected PID, the "
located on the side of the
screen.
– Press
graph.
– Press
Playback
to
Note: Graphing is only available on 1996 and newer vehicles
equipped with an OBD II (J1962) connector.
✓
The triangle below the graph indicates the position of the frame in
the graph.
❒
Use
through graph.
3 – 20 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
ENTER.
UP or
DOWN arrow
LEFT or
RIGHT arrow keys to scroll back and forth
", icon is
ENTER to view
ENTER again to return
.
LEFT or
RIGHT arrow keys to scroll back and forth
MIL STATUS
ON
ABS TPS(%)
100
ENGINE (RPM)
688
A/F RATIO
14:1
CALC LOAD
83.1
FRAME:0 TM
0.0
ABS TPS (%)
59%
100+
0 +
FRAME:0 TM
0.0