Actron CP9190 User Manual page 133

Ford Historic (OBD I) Diagnostics
✓
The following actions do not apply to MECS vehicles.
❒
For a 7.3L Diesel, press the throttle until test is done.
❒
If applicable, set octane switch to premium.
✓
The Scan Tool prompt the user to:
❒
Work steering wheel
❒
Pump brake pedal & cycle overdrive (OD) cancel switch.
(Cycle overdrive only if a pushbutton is available.)
✓
Observe screen for the prompt to perform the next action.
❒
Quickly press and release the throttle. One time only!
4. When test completed.
•Turn ignition key off.
• Press
✓
If no problems exist, Code 11 or
111 will be displayed.
5. View and write down
DTCs.
UP or
•Use
key to scroll to next DTC.
✓
ENG indicates that DTC is from the
engine or powertrain control
module.
6. Return to Diagnostic Codes Menu.
• Press
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 11
ENTER to continue.
DOWN arrow
BACK.
Test Completed
Turn ignition
key off.
Press ENTER to cont.
1 of 1
111
ENG
Systen Pass Code.
No faults detected
during KOER test.
KOER
1 of 3
326
ENG
PFE/DPFE EGR sensor
below min. voltage.
KOER
6