Erase Codes - Actron CP9190 User Manual

Chrysler Diagnostics

Erase Codes

✓
The Erase Codes function deletes the DTCs from the vehicle's
computer memory. Perform this function only after the systems
have been checked completely and DTCs have been docu-
mented. This function should be performed KOEO. Do not start
engine.
✓
After servicing the vehicle, erase the stored DTCs, perform a road
test, and then verify no new codes have been stored. If DTCs
return, the problem has not been corrected or other faults are
present.
From the Diagnostic Codes Menu.
1.Select Erase Codes.
•Use
key until Erase Codes is
highlighted.
•Press
2. Follow the instructions.
•Press
7
✓
A message confirms the codes
are erased.
3. Return to Diagnostic Codes
Menu.
•Press
7 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or DOWN arrow
ENTER.
ENTER.
ENTER
.
Diagnostic Codes Menu
Read Codes
Pending Codes
Erase Codes
View Fre eze Data
Review Data
Print Data
Code Lookup
Erase Codes
Turn ignition key on.
Engine must be off
to erase codes.
Press ENTER to cont.
Erase Codes
Codes Erased.