Actron CP9190 User Manual page 69

Global OBD II Diagnostics
✓
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]). The Scan Tool identifies
them by their identification names (ID) assigned by manufacturer (i.e.
$10 or $1A).
✓
If one or more control module stops responding, the Scan Tool
displays a message.
❒
If continuing, dashes will replace data in right hand column.
❒
If no is selected, then the Scan Tool attempts to re-establish
communication with that module.
View Entire List.
✓
View Entire List shows all supported PID data for the vehicle being
tested.
From Select Data to View menu:
1. Select Entire Data List.
UP or
•Use
key until Entire Data List is
highlighted.
•Press
2. View PIDs on Scan Tool.
UP or
•Use
key.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 5
DOWN arrow
ENTER.
DOWN arrow
Select Data to View
Entire Data List Entire Data List
Custom Data List
Customize Lines
English / Metric
A/C PRESS (psi) 15.5
A/C PRESS (V) 3.00
A/F RATIO 14:1
BARO PRESS ("Hg) 29.9
ABSLT TPS (%) 12.2
ENGINE (RPM) 2352
CALC LOAD (%) 83.1
MAF (LB/M) 0.57
4