Using The Scan Tool
✓
When selected data does not exist in the Scan Tool's memory, a
message informs the user to run the function.
3.Return to Select Print Data screen.
•Press
Code Lookup
Code Lookup is used to look up definitions of DTCs stored in the Scan
Tool.
✓
The Scan Tool does not require power from the vehicle to perform this
function.
1. Select Code Lookup.
UP or
•Use
key until Code Lookup is
highlighted.
•Press
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 23
ENTER
.
DOWN arrow
ENTER
.
Global Function List
Datastream
?
Diagnostic Codes
Special Tests
Review Data
Print Data
Code Lookup
Code Lookup
Tool Setup
3